Menu
Despite its high brightness and jaw-dropping image quality, PT-RQ35K Series is the smallest and lightest 3-Chip DLP™ product in its class and can be transported and installed with just two people. Save on labor costs and enjoy greater convenience when backyard space is limited.A combination of two blue and one red laser expands colour-space reproduction by 114 %*3 over the PT-RQ32K. Vivid red and pure blue reproduction heightens realism for an immersive experience and takes high-resolution content to the next level. Redesigned airflow path, cooling system, and finless radiator reinforce reliability. Dynamic Digital Control regulates red laser output and cooling for consistent image quality. Expect 20,000 hours of maintenance-free projection with backup input and laser failover circuitry offering peace of mind when projection can’t be interrupted.
| Projector type | 3-Chip DLP™ projector | |
|---|---|---|
| DLP™ chip | ||
| Panel size | 24.4 mm (0.96 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 3, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) x 3 | |
| Light source | Laser diodes (Blue LD, Red LD) | |
| Light output | 30,500 lm*1/32,000 lm (Center)*2 | |
| Time until light output declines to 50 %*3 | 20,000 hours (Normal), 24,000 hours (Eco), 26,000 hours (Quiet) | |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | WUXGA (1920 x 1200 pixels) |
| Contrast ratio*1 | 20,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200 | |
| Center-to-corner zone ratio*1 | 90 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift*4 (From the origin point of the lens mounter) | ||
| Vertical | ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered) | |
| Horizontal | ±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered) | |
| Keystone correction range | Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. | |
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | — | BNC x 1: 3G/HD-SDI input |
| HDMI IN | HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) | |
| DVI-D IN | — | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only) |
| MULTI PROJECTOR SYNC IN | BNC x 1 | — |
| MULTI PROJECTOR SYNC OUT | BNC x 1 | — |
| MULTI PROJECTOR SYNC IN terminal/3D SYNC 1 IN/OUT terminal (dual purpose) | — | BNC x 1 |
| MULTI PROJECTOR SYNC OUT terminal/3D SYNC 2 OUT terminal (dual purpose) | — | BNC x 1 |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB | USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick | |
| DC OUT | USB Type A x 2 (for power supply, DC 5 V total of 2 A) | |
| Expansion slot | SLOT 1/SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible | SLOT (one terminal, vacant) for interface boards, SLOT NX compatible |
| Power supply | AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V) | |
| Power consumption | 2,550 W (Standby: 14 W) | 2,450 W (Standby: 13 W) |
| Cabinet materials | Molded plastic | |
| Operation noise*1 | 49 dB (Normal), 46 dB (Quiet) | |
| Dimensions (W x H x D) | Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts) | |
| Weight*6 | 69.8 kg (153.9 lbs) | 68.6 kg (151.2 lbs) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™ | |
